4.7 ★ on GoogleCarolina Custom Concrete
Lake Norman, NC · Vertical concrete specialists
Vertical Concrete Wall Overlays
Stone, brick, slate, wood and carved texture applied to walls that are currently block, concrete or drywall. Using SureCrete WallStamp and WallSpray.
InsuredFree written estimates
SureCrete systemsWallStamp · WallSpray
(704) 966-9268Call or text
What are we building?
Pick the closest match — we will get the specifics when we walk the job.
We respond in less than 2 hours
01 · Built for this ground
Two systems, chosen by how deep the texture needs to be.
Both are cementitious overlays bonded to the wall rather than coatings laid on it. Which one your wall wants is decided by the look, not the substrate.
System
WallStamp
The thicker of the two. SureCrete publishes application up to three-quarters of an inch, which is what allows genuine relief — stone, brick, slate and wood textures that read correctly from a few feet away rather than from across the garden.
Up to 0.75″ · stone · brick · slate · wood
System
WallSpray
Applied thin and sprayed, then worked. Knockdown, lace, bubble and plaster textures — finer, flatter and faster, and the right answer when the wall needs to look finished rather than look like masonry.
Knockdown · lace · bubble · plaster
Substrates
What it bonds to
SureCrete lists block, brick, concrete, ICF, foam and drywall for these systems. That is what makes an interior feature wall or a foam-formed exterior as workable as a block retaining wall.
Block · brick · concrete · ICF · foam · drywall
02 · Where vertical overlays work
Walls that are structurally fine and visually finished.
The pattern is always the same: the wall is doing its job perfectly well and looks like what it is.
Retaining and site walls. A block retaining wall holds ground exactly as well with stone texture on it as without. This is the most common request we get.
Foundation walls and skirts. The exposed strip of foundation between siding and grade is one of the few places on a house where nothing has been designed, and it is unusually visible from the street.
Columns and piers. Porch and carport columns take texture well because they are seen close up and from every side.
Fireplaces and interior feature walls. The thin system bonds to drywall, which turns a feature wall into a surface job rather than a construction one.
03 · Why almost nobody local offers this
It is a different trade from flatwork.
Vertical work uses different materials, different tools and a different skill set from pouring and finishing a slab, which is why most concrete contractors in this area do not take it on.
We run it as a named service rather than as an occasional favor, which is the practical difference: the systems are ones we work with regularly rather than ones we would be learning on your wall.
If you have been told a wall has to be re-clad or rebuilt to change how it looks, it is worth a second opinion before anything is demolished.
04 · Straight answers
Vertical overlay questions.
Mostly about durability, and reasonably so.
What is the difference between WallStamp and WallSpray?
Thickness and how the texture is made. WallStamp is a thicker material that is applied and then stamped, so it can carry deep stone, brick, slate or wood texture. WallSpray is applied thin and sprayed, giving knockdown, lace, bubble or plaster textures. Deep relief versus fine texture, essentially.
What can a vertical overlay be applied to?
SureCrete publishes block, brick, concrete, ICF, foam and drywall among its substrates for these systems. In practice that covers most retaining walls, foundation walls, columns, chimney breasts and interior feature walls. What matters is that the substrate is sound and properly prepared.
Is it just a coating that will peel?
No. These are cementitious overlay systems bonded to the substrate, not a paint film sitting on the surface. Preparation is most of the job, and it is the part that decides whether the answer to this question stays no.
Can you match existing stone or brick?
Often closely, because both the texture and the color are chosen rather than fixed. Bring us a photo of what you are matching, or better, let us look at it.
Does it work outdoors in this climate?
Yes — these are exterior-rated systems and vertical surfaces shed water far better than flatwork does, which is the main reason concrete surfaces fail here.
Can you do interior walls?
Yes. Fireplace surrounds and feature walls are common, and the thin systems bond to drywall, which makes an interior wall a realistic candidate rather than a renovation.
05 · Free estimate
Send a photo of the wall.
Vertical work is easy to assess from a picture. Send one and we will tell you whether it is a WallStamp or a WallSpray job.
(704) 966-9268- Free written estimate
- Fully insured
- Call or text, seven days
Huntersville · Cornelius · Mooresville · Denver · Concord · North Charlotte · Troutman · Statesville